Ballistol Liquid Paving for carbon steel and iron, in 50 ml bottle

Ballistol Liquid Paving for Carbon Steel in 50 ml bottle

Carbon steel treatment (may contain a maximum of 3% stainless steel). Specially designed for blackening/treating gun steel.
(follow manufacturer's instructions)
Summary process:
- 1 - clean/degrease the parts to be treated;
- 2 - use fine steel wool "00" and "000" to remove stains, old rust and oxide;
- 3 - clean/degrease again;
(wear gloves and protective visor)
- 4 - apply the paving liquid to the areas to be treated using a cotton swab or new brush (wash the brush with soap and water beforehand;
- 5 - wait at least 3 minutes;
- 6 - apply water to stop the process;
- 7 - rub lightly with "000" steel wool;
- 8 - rinse and dry;
- 9 - apply the peacocking liquid again and repeat the process from point 4.
When the color is as desired, finish with "000" steel wool dipped in oil to remove excess peacocking, polish and stop the action of the liquid.
In some cases of rusty steel, it may be necessary to use Ballistol beforehand to remove rust, as well as Balistol to block the oxidation process.